Behringer 110 VCO/VCF/VCA

Please note: Since this is a back order product we cannot guarantee when it will be available, please also note that the price is indicative and subject to change. Please contact us for more information KEY FEATURES Amazing VCO/VCF/VCA module from the '80s Authentic reproduction of original "System 100M*" circuitry Complete synth voice with internal patched signal flow for ease of use VCO features 3 selectable waveforms (triangle, ramp and square with PWM) VCO offers pitch control over a wide range plus 1 audio output and 2 CV inputs VCF features cutoff, frequency and resonance controls plus 2 audio inputs and 2 CV inputs Oscillator PWM with manual and external CV control VCA features gain control plus 2 audio inputs, 2 audio outputs (low/high) and 2 CV inputs 17 controls and switches give you real-time access to all important parameters Eurorack specs: 16 HP, 60 mA +12 V, 50 mA -12 V DESCRIPTION The 80s was the golden age of electronic music. Synthesizers were at their prime and almost every hit song and movie soundtrack at that time had a synth in one form or another. Modular synths have become more and more popular with professionals and enthusiasts over the years and they’re about to get even better. SYSTEM 100 110 VCO/VCF/VCA This is the Behringer System 100 110 VCO/VCF/VCA Module. An authentic reproduction of the original “System 100M” circuitry from the 80s that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the 110 in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun! Controlling the Oscillator The 110 comes with a complete synth voice with an internally patched signal flow for ease of use and to save patching time so you can focus on your music. You can vary the VCO section by selecting one of three waveforms; triangle, ramp and Pulse Width Modulation which can be adjusted by the Mod Manual knob. The VCO also offers pitch and range control knobs as well as one audio output, which can be routed to another source, and two CV inputs. VCF and VCA The VCF features cutoff frequency and resonance sliders while the VCA comes with two audio outputs (low/high). Both the VCF and VCA each feature two audio inputs and two CV inputs that allow for other sources to be plugged into the 110, making it a must-have in any modular synth. Eurorack Ready Installing the 110 VCO/VCF/VCA is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 110 VCO/VCF/VCA to be mixed with other synth modules for a truly unique set up. Whether you’re just getting into modular synths or looking to complete your collection, the 110 VCO/VCF/VCA module from Behringer is a great tool to have when creating amazing music.  SPECIFICATIONS Inputs Pulse width mod Type 3.5 mm TS jack, DC coupled Impedance >70 kΩ, unbalanced Maximum input level 0 V to +10 V, 4% per volt Signal input Type Impedance >50 kΩ, unbalanced Max input level +17 dBu @ unity gain VCO mod input Type 2 x 3.5 mm TS jacks, summed Impedance >50 kΩ, unbalanced CV range 0 V to +10 V, 1 V/oct VCF mod input Type 2 x 3.5 mm TS jacks, summed Impedance >50 kΩ, unbalanced CV range 0 V to +10 V, 1 V/oct VCA mod input Type 2 x 3.5 mm TS jacks, summed Impedance >50 kΩ, unbalanced CV range 0 V to +10 V, typically 1 V per 10 dB Outputs VCO output Type 3.5 mm TS jack, DC coupled Impedance 1 kΩ, unbalanced Max output level 10 V p-p Frequency range with no external CV <10 Hz to 500 Hz Frequency range using external CV <1 Hz to 30 kHz VCA output Type 2 x 3.5 mm TS jacks, AC coupled High impedance 1 kΩ, unbalanced Low impedance 3 kΩ, unbalanced High max output leve +18 dBu Low max output level -2 dBu High output noise <-60 dBu, 22 Hz -22 kHz Low output noise <-80 dBu, 22 Hz -22 kHz Controls Pulse width manua 50% to min Waveform Triangle, sawtooth, pulse Range 32’, 16’, 8’, 4’, 2’ Pitch 2 octave range Cutoff frequency 20 Hz to 20 kHz Resonance Off to self oscillation Sig in level -∞ to unity gain Mod in level -∞ to unity gain VCA initial gain Power Power supply Eurorack Current draw 80 mA (+12 V), 50 mA (-12 V) Physical Dimensions 81 x 129 x 46 mm (3.2 x 5.1 x 1.8") Rack units 16 HP Weight 0.19 kg (0.42 lbs)