Wharfedale Delta X15 Passive PA Speakers

OVERVIEW: Delta X builds on the global success of the Wharfedale Pro Delta series.   Constructed from 15mm plywood and covered in the highest quality Rhino Rock paint, the new Delta X15 is instantly recognisable by the engraved iconic Wharfedale Pro ‘boomerang’ logo on its cabinet.  The fresh cosmetic design however is not the only improvement the engineering team have made.   Internally Delta X15 also has a new crossover design and construction.  Using new component positioning and bracing, the sensitive crossover electronics have been re-engineered to improve long term performance and reliability – even at the highest of volumes.     With rear panel switching, Delta X15 can operate in either Bi-Amp or Passive modes.  This routing flexibility allows for Delta X systems to be refined using multiple amplifiers and external crossovers. Custom Wharfedale Pro transducers have also been selected. High output, low physical distortion cast frame woofers deliver unparalleled low frequency response. With the exception of the Delta X10, 2” titanium compression drivers are coupled to 90°x45° elliptical waveguides for impressive output level and smooth HF dispersion.   System Type Passive Configuration Two-way Frequency Response (+/-3dB) 50-20KHZ Frequency Range (- 10 dB) 45-20KHZ Sensitivity (2.83v/1m) 98dB Calculated Maximum SPL @1m 131dB System Rated Impedance 8Ω Low Frequency Transducer Size 404mm / 15" Paper Voice-Coil Size 77.1mm / 3" Rated Impedance 8Ω LF Power (re:AES2-2012) 500W High Frequency Transducer HF Driver Type Compression Driver Voice-Coil Size 50.8mm / 2" Titanium Exit Size 35.6mm / 1.4" Diaphragm Material Titanium Rated Impedance 8Ω HF Power (re:AES2-2012) 50W Nominal Coverage (H x V) 90⁰ x 45⁰ Power System Continuous Power 500W System Programme Power 1000W System Peak Power 2000W Crossover frequency 1.8kHz Input Connector 2 x NL4 (speakON Compatible) Hardware Pole Mount Dual Angle (0⁰ / 10⁰) 35mm Socket Handles 2 on Sides Enclosure Enclosure Material 15mm Plywood Finish black paint Grille Material & Finish 1.5 mm Steel Black Dimensions - Unpacked Height 700mm / 27.6" Width Front 446mm / 17.6" Width Rear 281.4mm / 11.1" Depth 406mm / 16.0" Dimensions - Packed Height 803mm / 31.6" Width Front 622mm / 24.5" Width Rear 622mm / 24.5" Depth 498mm / 19.6" Weight Net Weight (kg / lbs) 29.9kg / 65.9lbs Gross Weight (kg / lbs) 35.5kg / 78.1lbs