Wharfedale WLA-210X Sub Speaker

The WLA-210X line array system keeps the same design philosophies as the acclaimed WLA-25 and WLA-28 systems from Wharfedale Pro. Portable, powerful and versatile line array solutions which are ideal for both touring and fixed installation applications. Each WLA-210X element uses a pair of custom 10” Wharfedale Pro high- power low-frequency drivers, while the high frequencies are handled by a premium 3.0” titanium diaphragm, neodymium magnet compression driver coupled to a 100° x 10° waveguide. The waveguide exit extends nearly to the top and bottom of the enclosure to create a continuous acoustical source - resulting in greatly reduced destructive interaction within the array. The WLA-210X element also features Passive and Bi-amp modes which allow for complete system control. The bi-amp feature enables the system designer to select the best amplification for each driver component within the array. Such control, when used with external signal processing such as the Wharfedale Pro Versadrive series, gives the engineer the ultimate in system fine-tuning. This, in turn, leads to the best audio output. Premium materials are used throughout the system. The enclosure is constructed of Baltic birch plywood and is coated in a premium and durable Rhino Rock paint. To keep the weight to a minimum and prevent rust, suspension fittings are made of aluminium. An elegantly simple 3-point suspension system combined with lightweight, compact size and excellent handling ergonomics mean that an array can easily be deployed. With the WLA-210X Common Fly frame, systems can be configured as flying or ground-stacked in multiple combinations. Features 2 x 10" LF drivers 3" Neodymium HF compression driver 138dB Max SPL 15mm / 18mm Birch plywood construction Integral, side plate adjustable rigging system 100° x 10° dispersion 180w programme HF 1600w programme LF 16Ω impedance Tech Specs Model name WLA-210X System type Passive Configuration Two-way Frequency response (+/-3dB) 65Hz - 20kHz Frequency range (-10dB) 60Hz - 20kHz Bi-amp sensitivity HF : 112dB / LF : 100dB Bi-amp Max SPL @ 1m HF : 138dB / LF : 135dB System rated impedance 16Ω LF Transducer Size 2 x 260mm / 10" Voice coil size 65mm / 2.5" LF Magnet material Ferrite Rated impedance 8Ω x 2 LF Power re:AES2-2012 2 x 400w HF Transducer HF driver type Compression driver Coil size 75mm / 3.0" Exit size 1.4" HF Magnet type NdFeB Diaphragm material Titanium Rated impedance 8Ω HF Power re:AES2-2012 80w Waveguide type Square Nominal coverage 100° x 10° System continuous power HF : 90w / LF : 800w System Programme power HF : 180w / LF : 1600w System Peak power HF : 360w / LF : 3200w Crossover frequency 1.5kHz Bi-amp mode switch Yes Input connector 2 x speakON compatible Rigging 3 integral Pole mount No Handles 2 Enclosure Cabinet type Trapezoidal Material 15mm / 18mm Plywood Colour options 1.5mm black paint Grille material Steel Dimensions unpacked Height 314mm / 12.4" Width front 760mm / 29.9" Width rear 760mm / 29.9" Depth 518.5mm / 20.4" Dimensions Packed Height 404mm / 15.9" Width front 855mm / 33.7" Width rear 855mm / 33.7" Depth 594mm / 23.4" Weight Net Weight 34.8kg / 76.6lbs Gross Weight 38.5kg / 84.7lbs It is imperative to use the Wharefedale Pro SC48FIR DSP with any Wharfedale Pro WLA Series Line Array