Authorised Distributor

Wharfedale Pro XR2500 Class H Power Amp 2 x 780 W @ 4 Ω

SKU: XR2500
Regular price 1,470.00 AED

List price. Trade accounts get better pricing: ask us for a B2B quote. Contact us

In stock
  • Full Specifications

    The XR2500 is a two-channel Class H amplifier rated at 2 x 530 W into 8 Ω and 2 x 780 W into 4 Ω. Bridge mode delivers 1 x 1550 W into 8 Ω. It is 482 mm wide, 88 mm high and 325 mm deep, and weighs 13.5 kg net. It has XLR inputs with XLR pin link outputs.

    Key features

    • 2 x 530 W at 8 Ω and 2 x 780 W at 4 Ω
    • Bridged: 1 x 1550 W at 8 Ω
    • Parallel / Stereo / Bridge mode switch
    • Input sensitivity switch: 0.775 V / 1.4 V; maximum input level 22 dBu (9.7 Vrms)
    • 2 x XLR socket inputs, 2 x XLR pin link, 2 x 4 pole speaker outputs
    • Damping factor > 200; frequency response 20 Hz - 20 kHz
    • Protection against short circuit, no load, on/off noise and radio interference

    Specifications

    Amp Channels 2
    Topology Class H
    8Ω 2 x 530 W
    4Ω 2 x 780 W
    8Ω Bridged 1 x 1550 W
    Input Connectors 2 x XLR Socket
    Output Connectors 2 x 4 Pole Speaker Connector
    Link Connectors 2 x XLR Pin
    Mode Switch Parallel / Stereo / Bridge Mode
    DSP Features None
    Input Gain/Sensitivity Switch 0.775 V / 1.4 V
    Slew Rate >20 V / us
    Output RMS Voltage (V) 64.5 V
    Maximum input Level 22 dBu (9.7 Vrms)
    Crosstalk -75 dB (1 kHz), -60 dB (10 kHz)
    Amplifier Frequency Response 20 Hz - 20 kHz
    Amplifier Input Impedance 20 KΩ
    Damping Factor > 200
    SNR ≥100
    Protection Protection circuit against short circuit, no load, on/off noise, radio interference
    Included Accessory User Manual

    Dimensions and weight

    Unpacked - Height (mm) 88
    Unpacked - Width Front (mm) 482
    Unpacked - Width Rear (mm) 482
    Unpacked - Depth (mm) 325
    Packed - Height (mm) 140
    Packed - Width Front (mm) 520
    Packed - Width Rear (mm) 520
    Packed - Depth (mm) 560
    Weight - Nett (kg) 13.5
    Weight - Gross (kg) 16.9

    Frequently asked questions

    Which connectors does the XR2500 use?

    Inputs are 2 x XLR socket, link outputs are 2 x XLR pin, and speaker outputs are 2 x 4 pole speaker connectors.

    Does it have onboard DSP?

    No. DSP features are listed as none.

    What comes in the box?

    The specification lists a user manual as the included accessory.

Have a project in mind? Start a conversation.

Tell us the brief and we’ll specify the system, confirm availability and
quote in AED or USD.